본문 바로가기

다구찌 실험계획법을 이용한 소구경화기 총열 내부용 Cr-Mo-V강의 질화공정 최적화

Optimization of Inner Nitriding Process for Cr-Mo-V Steel of Small Arms Barrel by using Taguchi Experimental Design Method

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
한국기계가공학회지17(3) · pp.148 · 2018
피인용
KCI 3
ISSN
1598-6721

저자

  1. 권혁린제1저자(주)S&T모티브
  2. 김동은(주)S&T모티브
  3. 손형동(주)S&T모티브
  4. 신재원국방기술품질원
  5. 박재하(주)이레테크
  6. 강명창교신저자부산대학교

초록

When shooting small arms, the inner surface temperature is heated up to about 700~1,000℃ by the friction of the bullet and the inner wall of the barrel and the combustion of propellant. High-temperature propellant gas and high-speed movement of the bullet cause corrosion of the inner wall, which is noticeable immediately in front of the chamber. In this study, the mechanical properties of Cr-Mo-V steel, which is the base material, were tested using Taguchi experimental design to find the best nitriding treatment conditions. For the nitriding process, the working time, salt bath temperature, and salt concentration were combined as three conditions and placed in the L9(34), orthogonal array table. The thicknesses of the white layer and the nitrogen diffusion layer were measured after nitriding under each condition in a salt bath furnace. Durability was evaluated by measuring the degree of dispersion through actual shooting because it was difficult to evaluate the mechanical properties of the cylinder inner structure. As a result, it was confirmed that the durability was optimal at 565℃, 1 hour, 0.5%. These optimal conditions were selected by the statistical analysis of the Minitab program(ver.17).

키워드

Cr-Mo-V Steel(크롬몰리브덴바나듐강)Nitriding Process(질화공정)Durability(내구수명)Optimization(최적화)Taguchi Experimental Design(다구찌 실험계획법)

식별자

KCI
ART002355153