본문 바로가기

습식 교반 및 방전 플라즈마 소결 공정에 의한 CNT 분산 Cu 복합재료 제조

Fabrication of CNT dispersed Cu matrix composites by wet mixing and spark plasma sintering process

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
한국분말재료학회지 (KPMI)25(2) · pp.158 · 2018
피인용
KCI 0
ISSN
2799-8525

저자

  1. 조승찬제1저자교신저자한국기계연구원부설 재료연구소
  2. 조일국한국기계연구원부설 재료연구소
  3. 이상복한국기계연구원부설 재료연구소
  4. 이상관한국기계연구원부설 재료연구소
  5. 최문희삼성전기
  6. 박재홍주식회사 차세대소재연구소
  7. 권한상부경대학교
  8. 김양도부산대학교

초록

Multi-walled carbon nanotube (MWCNT)–copper (Cu) composites are successfully fabricated by a combination of a binder-free wet mixing and spark plasma sintering (SPS) process. The SPS is performed under various conditions to investigate optimized processing conditions for minimizing the structural defects of CNTs and densifying the MWCNT–Cu composites. The electrical conductivities of MWCNT–Cu composites are slightly increased for compositions containing up to 1 vol.% CNT and remain above the value for sintered Cu up to 2 vol.% CNT. Uniformly dispersed CNTs in the Cu matrix with clean interfaces between the treated MWCNT and Cu leading to effective electrical transfer from the treated MWCNT to the Cu is believed to be the origin of the improved electrical conductivity of the treated MWCNT–Cu composites. The results indicate the possibility of exploiting CNTs as a contributing reinforcement phase for improving the electrical conductivity and mechanical properties in the Cu matrix composites.

키워드

Carbon nanotube (CNT)Copper (Cu)Metal matrix composite (MMC)Hetero aggregationElectrical conductivity

식별자

KCI
ART002344170