본문 바로가기

용접 자세에 따른 해양구조물용 항복강도 420MPa급 고강도강 FCA 용접부 파괴인성에 대한 연구

Study on the Fracture Toughness of FCA Weldment with the Yield Strength 420MPa Grade High Strength Steels for Offshore Structures Depending on the Welding Position

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널
대한용접접합학회지36(2) · pp.67 · 2018
피인용
KCI 0
ISSN
2466-2232

저자

  1. 김인찬제1저자조선선재온산 주식회사
  2. 정상훈조선선재온산 주식회사
  3. 최한글조선선재온산 주식회사
  4. 김명현교신저자부산대학교

초록

The fracture toughness of flux cored arc weld metal with the yield strength 420MPa grade high strength steels for offshore structures depending on the welding position was investigated. Charpy V-notch impact test and the CTOD test of the weld metal in the horizontal and the vertical-up welding positions were carried out, and the microstructure and M-A constituents of the weld metals were observed. The recovery rate of alloying elements in horizontal position weld metal were higher than vertical-up position weld metal and the fraction of low temperature transformation phases having high dislocation density in the horizontal position weld metal was high. As a result, the yield strength, tensile strength and impact toughness of horizontal weld metal were higher than those of vertical-up position weld metal. On the other hand, the CTOD value of vertical-up position weld metal was much higher than horizontal position weld metal. This is because the M-A constituents transformation is promoted by the post-welding on the low temperature transformation region having a high local C concentration in the horizontal position welding, and therefore, the breakdown starts easily by the high M-A constituents.

키워드

FCA Weld metalWelding positionFracture toughnessCTODMicrostructureM-A Constituents

식별자

KCI
ART002343209