본문 바로가기

Steam condensate behavior and heat transfer performance on chromium-ion-implanted metal surfaces

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
피인용
Web of Science 17Scopus 17
FWCI (Scopus)
0.92
JCR IF
JCR 2018 4.346
ISSN
0017-9310

저자

  1. 김기욱제1저자School of Mechanical Engineering, Pusan National University, Busan, South Korea
  2. 정지환교신저자School of Mechanical Engineering, Pusan National University, Busan, South Korea

초록

Aluminum, copper, nickel, and stainless steel 304 (SUS304) are widely used to construct heat exchangers. In this work, test specimens made of these metallic materials were irradiated with chromium ions. The static and dynamic contact angles of water droplets on the test specimens were measured to examine changes in the surface characteristics. Condensate behavior was visually observed and condensation heat transfer performance was experimentally measured. Filmwise condensation occurred on the surfaces of all the specimens that had no ion implantation. After these specimens were irradiated with chromium ions, filmwise condensation or dropwise condensation was induced depending on the ion irradiation conditions. When the substrates were irradiated with chromium ions at an ion energy level of 100 keV and an ion dose of 3 x 10(16) ions/cm(2), dropwise condensation occurred regardless of material. When the specimens were irradiated at an ion energy level of 70 keV, dropwise condensation, filmwise condensation, or both occurred depending on the substrate material. The condensation heat transfer coefficient of the surface where dropwise condensation occurred appeared to be more than 3.2 times larger than the theoretical value according to Nusselt's film theory in the subcooling region below 9.5 K. (C) 2019 Elsevier Ltd. All rights reserved.

키워드

Dropwise condensationFilmwise condensationIon implantationContact angleHeat transfer coefficientDROPWISE CONDENSATIONADHESION ENERGYLIQUID DROPLETSPOWER

식별자

Scopus EID
2-s2.0-85062592658
WoS UID
000467195600058