빛의 파장이 복합레진의 경도와 중합수축에 미치는 영향
Effects of light wavelength on the microhardenss and polymerization shrinkage of composite resins
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCI
- 저널
- 대한치과재료학회지44(4) · pp.367 · 2017
- 피인용
- KCI 1
- ISSN
- 2384-4434
저자
초록
As an activator of photoinitiator, the selection of a light source (wavelength) can affect the result of polymerization. This study examined how the wavelength of a light source affects the curing of composite resins. Four light-curing units (LCUs) (405, 457, and 473 nm lasers with 530 mW/cm2 and one light-emitting diode (LED) with 900 mW/cm2) and three composite resins (one only camphorquinone-containing and two camphorquinone+coinitiator-containing as an initiator) were used. To determine the degree of polymerization, the microhardness and polymerization shrinkage were assessed. On the top surface, two camphorquinone+coinitiator-containing specimens cured using the 473 nm laser showed slightly lower microhardness than those cured using the 405 and 457 nm lasers. However, specimen that contains only camphorquinone showed the lowest microhardness when cured using the 405 nm laser. On the bottom surface, the microhardness increased gradually as laser wavelength changed from 405 to 473 nm. The specimens cured using the LED LCU showed the highest polymerization shrinkage compared to that by the lasers. This study highlights the potential of blue lasers on the curing of various composite resins to the level that the LED LCU can achieve.
키워드
Composite resinLight wavelengthMicrohardnessPolymerization shrinkage복합레진빛의 파장미세경도중합수축
식별자
- KCI
- ART002302166



로그인
연구물 목록으로