본문 바로가기

Growth of 2-Inch alpha-Ga2O3 Epilayers via Rear-Flow-Controlled Mist Chemical Vapor Deposition

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q3Scopus Q2
피인용
Web of Science 43Scopus 48
FWCI (Scopus)
1.44
JCR IF
JCR 2018 1.795
ISSN
2162-8769

저자

  1. 김경호제1저자Department of Materials Science and Engineering, Pusan National University, Busan, 46241, Korea
  2. Ha, Minh-TanEnergy and Environmental Division, Korea Institute of Ceramic Engineering and Technology, Jinju, 52851, Korea
  3. Kwon, Yong-JinEnergy and Environmental Division, Korea Institute of Ceramic Engineering and Technology, Jinju, 52851, Korea
  4. 이희수Department of Materials Science and Engineering, Pusan National University, Busan, 46241, Korea
  5. Jeong, Seong-MinEnergy and Environmental Division, Korea Institute of Ceramic Engineering and Technology, Jinju, 52851, Korea
  6. Bae, Si-Young교신저자Energy and Environmental Division, Korea Institute of Ceramic Engineering and Technology, Jinju, 52851, Korea

초록

The effectiveness of rear-flow-controlled mist chemical vapor deposition (mist CVD) for the growth of 2-inch alpha-Ga2O3 epilayers was studied. The numerical simulation indicated that the low velocity of the flow is appropriate for inducing an upward flow on the growth front without a vortex. Under the flow velocity of 0.08 m/s, alpha-Ga2O3 the epilayers were successfully grown on c-plane sapphire substrates. The epilayers were high-quality with full widths at half maximum of 42 arcsec and 1993 arcsec for the (0006) and (104) plane reflections, respectively. The rear-flow-controlled mist CVD was demonstrated to be effective for long-time growth. The thickness was adequately increased with increasing growth time. At the same time, corundum alpha-phase crystal features were distinguished. The suggested mist CVD system not only provides a cost-saving solution for Ga2O3 epilayers' growth but is also effective for retaining the uniformity of the Ga2O3 epilayers over a large area. (c) The Author(s) 2019. Published by ECS.

키워드

OPTICAL-PROPERTIESTHIN-FILMSSAPPHIREPRESSURE

식별자

Scopus EID
2-s2.0-85071693738
WoS UID
000462089800001