Evaluation of formability enhancement of aluminum alloy sheet in electrohydraulic forming process with free-bulge die
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q1
- 저널
- INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY101(1-4) · pp.1085 · 2019
- 피인용
- Web of Science 17Scopus 21
- FWCI (Scopus)
- 0.99
- JCR IF
- JCR 2018 2.496
- ISSN
- 0268-3768
저자
- 우민아제1저자Department of Aerospace Engineering, Pusan National University, Busan, South Korea
- 송우진Department of Green Transportation System, Graduate School of Convergence Science, Pusan National University, Busan, South Korea
- 강범수Department of Aerospace Engineering, Pusan National University, Busan, South Korea
- 김정교신저자Department of Aerospace Engineering, Pusan National University, Busan, South Korea
초록
Electrohydraulic forming (EHF), a high-speed forming process, deforms a material by using high-pressure shockwaves in a fluid-filled chamber. When a material is deformed at speeds higher than 100m/s, its formability can be improved due to the high-strain rate effect. This allows for the production of complex shapes, such as sharp edges. Therefore, in the present study, we confirm improvement in the formability of aluminum alloy 6061-T6 under high-strain rate condition by conducting EHF experiments. The strains of the deformed specimen are measured using a strain measurement apparatus, and they are compared with the values obtained from a quasi-static forming limit diagram. The comparison verified the improvement in formability, in that the material did not fracture even though the strain distribution of the material at high speeds was located higher than the quasi-static forming limit curve. In addition, we perform finite element analysis to observe the deformed material in detail. Finally, we compare the strain distributions obtained in the numerical simulation and the experiment to verify the reliability of the numerical model proposed herein.
키워드
Electrohydraulic formingAluminum alloyFormabilityForming limit diagramFinite element analysisDUAL-PHASE STEELSLIMIT DIAGRAMSTRAINMETALSMODELSREDUCE
식별자
- Scopus EID
- 2-s2.0-85056620915
- WoS UID
- 000461051300079



로그인
연구물 목록으로