본문 바로가기

Analysis on selective laser melting of WC-reinforced H13 steel composite powder by finite element method

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q4Scopus Q3
피인용
Web of Science 24Scopus 26
FWCI (Scopus)
1
JCR IF
JCR 2018 1.024
ISSN
1687-8132

저자

  1. 우영윤제1저자School of Mechanical Engineering, Pusan National University, Busan, South Korea
  2. 황태우School of Mechanical Engineering, Pusan National University, Busan, South Korea
  3. 오일영School of Mechanical Engineering, Pusan National University, Busan, South Korea
  4. 서동명School of Mechanical Engineering, Pusan National University, Busan, South Korea
  5. 문영훈교신저자School of Mechanical Engineering, Pusan National University, Busan, South Korea

초록

A three-dimensional finite element model for the selective laser melting process was developed to analyze the melting behavior of WC-reinforced H13 steel composite powder. In this model, convection and radiation on the external surface during laser irradiation were considered, and moving Gaussian heat flux was assumed in the thermal model. The molten pool geometry based on the simulated temperature distributions was investigated for various parameters such as distribution factor, packing efficiency, absorption coefficient, and specific heat factor. The input values of density, conductivity, and specific heat were obtained from the rule of mixture, and absorption coefficients were experimentally determined at given mixing ratios of WC and H13 steel. The simulation results showed that the relative fractions of WC and H13 steel powder significantly affect molten pool geometry. In terms of point-of-process parameters, the distribution factor, packing efficiency, and absorption coefficient are the main parameters that control molten pool geometry.

키워드

Additive manufacturingselective laser melting processfinite element methodrule of mixtureWC-reinforcedH13 steel compositeTHERMAL-BEHAVIORSIMULATIONBEDNANOCOMPOSITESHEATCONDUCTIVITYPREDICTIONSINGLEMODEL

식별자

Scopus EID
2-s2.0-85060532342
WoS UID
000460991300001