Effective Establishment of Glide-Path to Reduce Torsional Stress during Nickel-Titanium Rotary Instrumentation
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q2
- 저널
- MATERIALS12(3) · 2019
- 피인용
- Web of Science 9Scopus 10
- FWCI (Scopus)
- 0.28
- JCR IF
- JCR 2018 2.972
- ISSN
- 1996-1944
저자
- Abu-Tahun, Ibrahim H.제1저자Department of Conservative Dentistry, School of Dentistry, The University of Jordan, Amman, Jordan
- 곽상원Department of Conservative Dentistry, School of Dentistry, Pusan National University, Dental Research Institute, Yangsan, South Korea
- Ha, Jung-HongDepartment of Conservative Dentistry, School of Dentistry, Kyungpook National University, Daegu, South Korea
- Sigurdsson, AsgeirDepartment of Endodontics, New York University College of Dentistry, New York, United States
- Kayahan, Mehmet BayboraDepartment of Endodontics, Faculty of Dentistry, Okan University, Istanbul, Turkey
- 김현철교신저자Department of Conservative Dentistry, School of Dentistry, Pusan National University, Dental Research Institute, Yangsan, South Korea
초록
This study compared the torque generation during canal shaping with a nickel-titanium endodontic instrument according to the extent of glide-path establishment. Seventy-five simulated S-shaped canal blocks were divided into five groups (n = 15) according to the number of repetitive insertions to the working length using a One G glide-path instrument: groups with 5, 10, 15, and 20 insertions as well as group Z without glide-path establishment. When the tip of the One G file reached the working length, the file was moved back and forth repetitively at the working length for the designated number of times for each group. The instrumentation procedure with HyFlex EDM had 15 pecking strokes. During instrumentation, the generated torque was transmitted to a customized data acquisition module and collected using customized software. Data were computed to determine the maximum torque and total stress. The maximum screw-in forces were statistically analyzed using one-way analysis of variance and Tukey's post hoc comparison test with a significance level of 95%. While the maximum stress did not have significant differences among the five groups (p > 0.05), groups with more than 10 repetitive insertions generated lower total stress during instrumentation than did the group with 5 insertions and group Z (p < 0.05). Under the limitations of this study, repetitive insertions of glide-path establishment files at the working length reduced stress generation during the shaping using nickel-titanium instruments.
키워드
glide-pathNiTi rotary filetorque measurementtorsional resistancetorsional stressROOT-CANAL PREPARATIONMECHANICAL-PROPERTIESPROTAPERFILESDEFECTSCREATESYSTEM
식별자
- Scopus EID
- 2-s2.0-85061088139
- WoS UID
- 000460768000162



로그인
연구물 목록으로