Evaluation of Resistance Spot Weld Interfacial Fractures in Tensile-Shear Tests of TRIP 590 Steels
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널
- Korean Journal of Metals and Materials46 · pp.672 · 2008
- 피인용
- Web of Science 8
- ISSN
- 1738-8228
저자
- Park, Sang-Soon제1저자동의대학교, Dept Adv Mat Engn, KO
- Lee, Sang-Min동의대학교, Dept Adv Mat Engn, KO
- Cho, Yongjoon현대, Fundamental Engn Dev Team, Hwaseong 445706, KO
- 강남현부산대학교, 공과대학, 재료공학부, KO
- Yu, Ji-Hun한국기계연구원, Dept Powder Mat Res, Chang Won 641831, KO
- Kim, Young-Seok한국생산기술연구원, Div Dongnam Area Technol Serv, KO
- Park, Yeong-Do교신저자동의대학교, Dept Adv Mat Engn, KO
초록
The resistance spot welding of TRIP590 steels was investigated to enhance understanding of weld fracture during tensile-shear strength (TSS) test. The main failure modes for spot welds of TRIP590 steels were nugget pullout and interfacial fracture. The peak load to cause a weld interfacial failure was found to be related to fracture toughness of the weld and the weld diameter. Although interfacial fracture occurred in the samples, the load carrying capacity of the weld was high and not significantly affected by the fracture mode. Substantial part of the weld exhibits the characteristic dimple (or elongated dimple) fractures on interfacial fractured surface, in spite of the high hardness values associated with the martensite microstructures. The high load-bearing ability of the weld is directly associated with the area of ductile fracture occurred in weld. Therefore, the judgment of the quality of resistance spot welds in TRIP590 steels, the load carrying capacity of the weld should be considered as an important factor than fracture mode.
키워드
trip steels (TRIP590)resistance spot weldinterfacial fracturetensile-shear test
식별자
- WoS UID
- 000260880400008



로그인
연구물 목록으로