본문 바로가기

Effects of Carbon and Sulfur Content on Mechanical Properties of High Purity Steel

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널
Korean Journal of Metals and Materials47 · pp.331 · 2009
피인용
Web of Science 2KCI 3
ISSN
1738-8228

저자

  1. 윤정봉제1저자포스코
  2. 김성일포스코
  3. 김인배교신저자부산대학교

초록

To lower the annealing temperature and the deviation of the mechanical properties of bake hardening steels, high purity steels were investigated. The steels were characterized by treating at low recrystallization temperature. It was confirmed that the strengthening originated from the solid solution of carbon and the ferrite grain refinement by fine MnS precipitates as carbon and sulfur contents increased in high purity steels. However, it was observed that there was no more increase of strength in steels containing over 40 ppm of carbon. It was considered that the excess carbon formed either the carbon cluster or the low temperature unstable carbides which had the negligible effect on the strengthening because they were reported to be highly coherent with the matrix. The carbon cluster and unstable carbides could be transformed to the stable cementite during bake hardening treatment. MnS was not observed in the high purity steel containing 5 ppm S, resulting in very coarse recrystallized grains and good ductility. As sulfur content increased, the recrystallized grain size decreased due to the formation of the fine MnS precipitates.

키워드

high purity steelmanganese sulfidesdrawabilityrecrystallization temperature

식별자

WoS UID
000267607100001
KCI
ART001353573