Buckling Strength Increment of Curved Panels Due to Rotational Stiffness of Closed-Section Ribs Under Uniaxial Compression
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q4Scopus Q3
- 저널
- International Journal of STEEL STRUCTURES (IJOSS)18(4) · pp.1363 · 2018
- 피인용
- Web of Science 5Scopus 6KCI 2
- FWCI (Scopus)
- 0.28
- JCR IF
- JCR 2017 0.734
- ISSN
- 1598-2351
저자
- Andico, Arriane Nicole P.제1저자Department of Civil Engineering, Hanbat National University, Yuseong-gu, Daejeon, South Korea
- 박용명Department of Civil Engineering, Pusan National University, Geumjeong-gu, Busan, South Korea
- Choi, Byung H.교신저자Department of Civil Engineering, Hanbat National University, Yuseong-gu, Daejeon, South Korea
초록
Recently, there have been studies about the increasing effect on the local plate buckling strength of flat plates when longitudinally stiffened with closed-section ribs and an approximate solution to quantitatively estimate these effects were suggested for flat plates. Since there are few studies to utilize such increasing effect on curved panels and a proper design method is not proposed, thus, this study aims to numerically evaluate such effect due to the rotational stiffness of closed-section ribs on curved panels and to propose an approximate method for estimating the buckling strength. Three-dimensional finite element models were set up using a general structural analysis program ABAQUS and a series of parametric numerical analyses were conducted in order to examine the variation of buckling stresses along with the rotational stiffness of closed-section ribs. By using a methodology that combine the strength increment factor due to the restraining effect by closed-section ribs and the buckling coefficient of the panel curvature, the approximate solutions for the estimation of buckling strength were suggested. The validity of the proposed methods was verified through a comparative study with the numerical analysis results.
키워드
Curved panelsClosed-section ribsBuckling strengthElastic restraintRotational stiffnessLongitudinal stiffener
식별자
- Scopus EID
- 2-s2.0-85056753685
- WoS UID
- 000451957600023
- KCI
- ART002404083



로그인
연구물 목록으로