본문 바로가기

Distribution of Optimum Yield-Strength and Plastic Strain Energy Prediction of Hysteretic Dampers in Coupled Shear Wall Buildings

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q4Scopus Q3
피인용
Web of Science 5Scopus 6KCI 2
FWCI (Scopus)
0.37
JCR IF
JCR 2017 0.734
ISSN
1598-2351

저자

  1. 바게리 바하도르제1저자교신저자Department of Architectural Engineering, Pusan National University, Busan, South Korea
  2. 오상훈Department of Architectural Engineering, Pusan National University, Busan, South Korea
  3. 신승훈Department of Architectural Engineering, Pusan National University, Busan, South Korea

초록

The structural behavior of reinforced concrete coupled shear wall structures is greatly influenced by the behavior of their coupling beams. This paper presents a process of the seismic analysis of reinforced concrete coupled shear wall-frame system linked by hysteretic dampers at each floor. The hysteretic dampers are located at the middle portion of the linked beams which most of the inelastic damage would be concentrated. This study concerned particularly with wall-frame structures that do not twist. The proposed method, which is based on the energy equilibrium method, offers an important design method by the result of increasing energy dissipation capacity and reducing damage to the wall's base. The optimum distribution of yield shear force coefficients is to evenly distribute the damage at dampers over the structural height based on the cumulative plastic deformation ratio of the dissipation device. Nonlinear dynamic analysis indicates that, with a proper set of damping parameters, the wall's dynamic responses can be well controlled. Finally, based on the total plastic strain energy and its trend through the height of the buildings, a prediction equation is suggested.

키워드

Coupled shear wallPassive control systemOptimum distribution of yield shear force coefficients of dampersPlastic strain energy of dampers

식별자

Scopus EID
2-s2.0-85056782086
WoS UID
000451957600003
KCI
ART002404020