Investigation of the Localized Corrosion and Passive Behavior of Type 304 Stainless Steels with 0.2-1.8 wt % B
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q2
- 저널
- MATERIALS11(11) · 2018
- 피인용
- Web of Science 32Scopus 35
- FWCI (Scopus)
- 0.51
- JCR IF
- JCR 2017 2.467
- ISSN
- 1996-1944
저자
- Ha, Heon-Young제1저자교신저자Ferrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea
- Jang, Jae HoonFerrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea
- Lee, Tae-HoFerrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea
- 원치형Department of Metallurgical Engineering, Pusan National University, Busan, South Korea
- Lee, Chang-HoonFerrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea
- Moon, JoonohFerrous Alloy Department, Korea Institute of Materials Science, Changwon, South Korea
- 이창근Department of Metallurgical Engineering, Pusan National University, Busan, South Korea
초록
The pitting corrosion resistance and passive behavior of type 304 borated stainless steels (Fe-balance-18Cr-12Ni-1.5Mn-(0.19, 0.78, and 1.76 wt %)B) manufactured through conventional ingot metallurgy were investigated. The alloys were composed of an austenitic matrix and Cr2B phase, and the volume fraction of Cr2B increased from 1.68 to 22.66 vol % as the B content increased from 0.19 to 1.76 wt %. Potentiodynamic polarization tests measured in aqueous NaCl solutions revealed that the pitting corrosion resistance was reduced as the B content increased and the pits were initiated at the matrix adjacent to the Cr2B phase. It was found that the reduced resistance to pitting corrosion by B addition was due to the formation of more defective and thinner passive film and increased pit initiation sites in the matrix.
키워드
borated stainless steelspitting corrosionpassive filmPITTING CORROSIONPERCENT-CRBORONRESISTANCENBNITROGENFILMSMN
식별자
- Scopus EID
- 2-s2.0-85055549662
- WoS UID
- 000451755500032



로그인
연구물 목록으로