본문 바로가기

Improved Electrical Performance of SiO2-Doped Indium Zinc Oxide Thin-Film Transistor

문서 유형
연구출판물 · 학술지 논문
등재
SCIE
저널
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY19(3) · pp.1470 · 2019
피인용
Web of Science 5
JCR IF
JCR 2018 1.093
ISSN
1533-4880

저자

  1. 임유성제1저자부산대학교, 공과대학, 전기전자공학부, 전자공학전공, KO
  2. 황남경부산대학교, 공과대학, 전기전자공학부, 전자공학전공, KO
  3. 이정석부산대학교, 공과대학, 전기전자공학부, 전자공학전공, KO
  4. 이세형부산대학교, 공과대학, 전기전자공학부, 전자공학전공, KO
  5. 이문석교신저자부산대학교, 공과대학, 전기전자공학부, 전자공학전공, KO

초록

In this study, we investigated the effect of oxygen content on the stability and the role of silicon in amorphous SiO2-doped indium-zinc-oxide thin film transistor. The SiO2-doped IZO (SIZO) thin-films were deposited at room temperature by radio-frequency magnetron co-sputtering. To optimize stability and electrical performance, we changed the amount of oxygen by changing oxygen gas ratio in reactive sputtering (11%, 12%, and 13%) and used SiO2 target to deposit SIZO active layer. By adjusting the parameters of SIZO thin-film transistor (TFT) preparation, we found that the best performance was obtained when the oxygen ratio of a-SIZO films was 11%. The optimized a-SIZO TFT exhibited an on/off current ratio (I-on/I-off) of 2.1x10(7), saturation mobility (mu(sat)) of 53.6 cm(2)/V.s, threshold voltage (Vth) of -7.3 V, and subthreshold swing (S.S.) of 1.7 V/decade. Compared to a-IZO films, the a-SIZO film showed better stability and electrical performance because it had fewer oxygen vacancies and defects.

키워드

Oxide TFTSi-IZORf-Magnetron SputterStability

식별자

WoS UID
000450899000041