Aerodynamic performance improvement of wind turbine blade by cavity shape optimization
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- RENEWABLE ENERGY132 · pp.773 · 2019
- 피인용
- Web of Science 41Scopus 57
- FWCI (Scopus)
- 1.1
- JCR IF
- JCR 2018 5.439
- ISSN
- 0960-1481
저자
- Fatehi, Mostafa제1저자Department of Mechanical Engineering, Isfahan University of Technology, Iran
- Nili-Ahmadabadi, Mahdi교신저자Department of Mechanical Engineering, Isfahan University of Technology, Iran
- 오미드 네마톨라히School of Mechanical Engineering, Pusan National University, Busan, South Korea
- Minaiean, AliDepartment of Mechanical Engineering, Isfahan University of Technology, Iran
- 김경천School of Mechanical Engineering, Pusan National University, Busan, South Korea
초록
Many conventional airfoils, despite a good performance at their design points, get out of optimal conditions outside the design points. One passive way to enhance the airfoil performance is to use a cavity with an optimized shape. In this study, Riso_B1_18 airfoil, having a remarkable aerodynamic performance for wind turbine blades, is selected as a substrate for deploying an optimized cavity on the airfoil. For shape optimization of a cavity, its shape and downstream suction surface are parametrized to reach an optimum lift-to-drag ratio as the target function by using the genetic algorithm. The results of transient numerical solution indicate that the optimized cavity is well capable of draping vortex to control the stall margin, prevent flow fluctuations and significantly increase the lift-to-drag ratio at off design conditions. To validate the performance improvement obtained from this numerical optimization, a force measurement setup is accomplished in a wind tunnel with 30 x 30 cm(2) test section to measure the lift and drag forces of the Riso airfoil with and without optimized cavity. The experimental results shows that the lift-to-drag ratio increases 31% at AOA = 14 degrees and 57% at AOA = 20 degrees due to using the optimized cavity. (C) 2018 Elsevier Ltd. All rights reserved.
키워드
Riso_B1 airfoilCavityAerodynamic performanceOptimizationWind turbineGenetic algorithmPASSIVE FLOW-CONTROLVORTEX GENERATORSTRAPPED VORTEXAIRFOILOSCILLATIONSENHANCEMENTSTALL
식별자
- Scopus EID
- 2-s2.0-85053180684
- WoS UID
- 000449892900061



로그인
연구물 목록으로