본문 바로가기

A Study on the Change of Wettability According to the Direction of Micro-Patterned Copper Film Surface Using Continuous-Wave Laser

문서 유형
연구출판물 · 학술지 논문
등재
SCIE
저널 순위
Scopus Q2
저널
NANOSCIENCE AND NANOTECHNOLOGY LETTERS10(9) · pp.1301 · 2018
피인용
Web of Science 1
JCR IF
JCR 2017 2.917
ISSN
1941-4900

저자

  1. 윤단희제1저자부산대학교, 나노과학기술대학, 광메카트로닉스공학과, KO
  2. 박준한부산대학교, 대학원, 인지메카트로닉스공학과, 인지메카트로닉스공학전공, KO
  3. 곽청렬부산대학교, 대학원 협동과정, 첨단혁신제조협동과정, KO
  4. 마용원부산대학교, 대학원 협동과정, 첨단혁신제조협동과정, KO
  5. 신보성교신저자부산대학교, 나노과학기술대학, 광메카트로닉스공학과, KO

초록

In general, when hydrophobicity is imparted through surface processing, a method of generating structures with dual-scale (micro- and nano-) roughness is used. Microgrooves are formed, and the contact angle in the perpendicular direction of the line pattern is measured to select angles showing the hydrophobic/super-hydrophobic characteristics. In contrast, the contact angle measured in the vertical direction of the line pattern is not considered important. In this paper, we demonstrate that the contact angle changes according to the measurement direction with respect to the processed line pattern. We fabricated a hydrophobic surface by forming 20-80 mu m microgrooves on a copper film by irradiating with a continuous-wave (CW) laser. Afterward, both a hydrophobic value and a non-hydrophobic value were observed on the same pattern depending on the measurement direction. It was found that the direction of each shape of the processed specimen is an important factor in determining wettability.

키워드

Laser ProcessingWettabilityMicro-PatternedLine PatternCopper Film

식별자

WoS UID
000446690600024