본문 바로가기

Microstructure and properties of Nb-doped diamond-like carbon films deposited by high power impulse magnetron sputtering

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q1
저널
THIN SOLID FILMS663 · pp.159 · 2018
피인용
Web of Science 40Scopus 42
FWCI (Scopus)
1.07
JCR IF
JCR 2017 1.939
ISSN
0040-6090

저자

  1. 딩지청제1저자School of Convergence Science, Pusan National University, Busan, South Korea
  2. 다이 웨이Global Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  3. 장텅페이Global Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  4. 자오핀School of Convergence Science, Pusan National University, Busan, South Korea
  5. Yun, Je MoonGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea
  6. 김광호교신저자School of Convergence Science, Pusan National University, Busan, South Korea
  7. Wang, Qi MinSchool of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, China

초록

Niobium (Nb)-doped diamond-like carbon (Nb-DLC) films were deposited on Si and stainless steel substrates using a hybrid deposition system composed of a high power impulse magnetron sputtering (HiPIMS) and a pulse direct current magnetron sputtering (PDC-MS). The Nb concentration (0-23.43 at. %) in the film was controlled by adjusting the PDC power. The influences of Nb doping on the composition, phase structure, microstructure, and carbon atoms bond of DLC films were studied from various measurement tools, such as X-ray photoelectron spectroscope, X-ray diffraction, transmission electron microscope, scanning electron microscope, atomic force microscope and Raman spectroscope. Nano-indentation, stress-tester and ball-on-disk tribometer were also applied to study the mechanical properties and friction behavior, respectively. The results indicated that with increasing Nb concentration, the Nb-DLC films transformed from amorphous phase to nanocomposite structure with carbide phase embedding in the matrix of amorphous carbon. The surface morphology was composed of large agglomeration hills and the cross-sectional images exhibited apparent columnar structure. In addition, the increase in Nb content led to an increase of hardness initially, and then decreased with further increase of Nb content. The residual stress was decreased monotonically. The pure DLC film exhibited a lower friction coefficient and narrower width of wear scar, while the nanocomposite Nb-DLC films showed a high friction coefficient and large wear scar, although they possessed a high hardness. It could be ascribed to the formation of carbide hard particles as a result of scratching the contact surface during friction tests at high Nb doping concentration.

키워드

Diamond-like carbonNiobium-dopingMicrostructureMechanical propertiesFriction propertiesHigh power impulse magnetron sputteringH THIN-FILMSTHERMAL-STABILITYNANOCOMPOSITE COATINGSMECHANICAL-PROPERTIESAMORPHOUS-CARBONION-IMPLANTATION

식별자

Scopus EID
2-s2.0-85052307612
WoS UID
000443012200023