A forming process design for a non-welded metal seal
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q1
- 저널
- INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY98(5-8) · pp.1989 · 2018
- 피인용
- Web of Science 0Scopus 0
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2017 2.601
- ISSN
- 0268-3768
저자
- 성한샘제1저자Mechanical Convergence Technology, Pusan National University, Busan, South Korea
- 곽효서Research Institute of Mechanical Technology, Pusan National University, Busan, South Korea
- 박건영Mechanical Convergence Technology, Pusan National University, Busan, South Korea
- 임경국Mechanical Convergence Technology, Pusan National University, Busan, South Korea
- 김철교신저자Department of Mechanical Engineering, Pusan National University, Busan, South Korea
초록
A C-type metal seal has outstanding airtightness performance in extreme conditions. It is used in gas turbines for thermoelectric power plants to prevent leakage and maintain the high pressure of the combustor. The cylindrical blank for a C-type metal seal is manufactured through a welding process. However, it requires defect inspections, incurs additional costs due to heat treatment, and causes degradation in the airtightness performance. This study introduces a cup-drawing process to replace the welding and heat treatment processes. This process reduces the manufacturing cost, but the cup drawing hinders the formability of the hydroforming process due to residual stress and working hardening. To solve this problem, a die design was carried out through coupled field analysis of the cup drawing and the hydroforming processes, and the formability was analyzed. The conditions of the heat treatment after the hydroforming were established to remove the residual stress and improve the material properties of Inconel 718. To validate the proposed cup drawing and hydroforming processes, leakage and elastic restoring tests (for the force and amount of elastic restoring) were performed using the non-welded metal seal assembled with inner aids to enhance airtightness.
키워드
Metal sealNon-weldingForming analysisResidual stressHeat treatment
식별자
- Scopus EID
- 2-s2.0-85049138194
- WoS UID
- 000442690500064



로그인
연구물 목록으로