본문 바로가기

Characteristics of Soot and Radiation of Post Combustion Simulated Gas from a Gas Generator

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q1
저널
ENERGIES11(7) · 2018
피인용
Web of Science 3Scopus 3
FWCI (Scopus)
0.08
JCR IF
JCR 2017 2.676
ISSN
1996-1073

저자

  1. 김학덕제1저자School of Mechanical Engineering, Pusan National University, Busan, South Korea
  2. 송주헌교신저자School of Mechanical Engineering, Pusan National University, Busan, South Korea

초록

It is necessary to install a specific burner system to burn out fuel-rich post combustion gas produced from a gas generator in a rocket engine when the performance of gas generator is separately evaluated in a test facility. Because of the fuel-rich reburning conditions, the burner still emits a significant amount of soot and produces thermal radiation. In this study, a laboratory-scale coflow diffusion burner was developed to examine the effects of fuel composition in combustion products on the soot emission and radiation behavior. The post combustion gas was simulated by adding carbon monoxide and carbon dioxide to two different base fuels: kerosene vapor and ethylene. The radiation flux sensor and laser extinction apparatus were used to measure the radiation intensity and soot emission, respectively, within a flame. The flame length and temperature were measured to examine the combustion behavior of each sooting flame having a strong radiation. Finally, the relationship between soot emission and radiation intensity was proposed based on all the experimental data.

키워드

gas generatorfuel richpost combustion gassoot emissionradiationLAMINAR DIFFUSION FLAMESTEMPERATURE-MEASUREMENTSDILUENTSBEHAVIORFUELSCO2

식별자

Scopus EID
2-s2.0-85050973285
WoS UID
000441830500115