본문 바로가기

3D porous metal structure manufacturing using UV pulsed laser and copper formate solution

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q3Scopus Q2
피인용
Web of Science 1Scopus 2
FWCI (Scopus)
0
JCR IF
JCR 2017 1.604
ISSN
0947-8396

저자

  1. 강보석제1저자Interdisciplinary Department for Advanced Innovative Manufacturing Engineering, Pusan National University, Busan, South Korea
  2. 홍성무Convergence Research Center of 3D Laser-aided Innovative Manufacturing Technology, Pusan National University, Busan, South Korea
  3. 유찬주Interdisciplinary Department for Advanced Innovative Manufacturing Engineering, Pusan National University, Busan, South Korea
  4. 유동빈Department of Cogno-Mechatronics Engineering, Pusan National University, Busan, South Korea
  5. 마용원Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University, Busan, South Korea
  6. 이상매Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University, Busan, South Korea
  7. Kim, Min-WooManufacturing Automation Research Division, Korea Institute of Footwear & Leather Technology, Busan, South Korea
  8. Kim, Myung HunManufacturing Automation Research Division, Korea Institute of Footwear & Leather Technology, Busan, South Korea
  9. 신보성교신저자Convergence Research Center of 3D Laser-aided Innovative Manufacturing Technology, Pusan National University, Busan, South Korea

초록

This paper demonstrates a simple fabrication method of porous metal structures using liquid phase solution (copper formate solution) based on UV pulse laser deposition. This process can produce arbitrary metal 3D structures at room temperature and atmosphere. Primary reactions are redox processes by photothermal effect. Local temperature elevation induced by laser exposure activates selective copper formation effects. It can be a method of 3D additive manufacturing processes, which has some advantages that no supporter and no shielding environment preventing the oxidation are required. Also, the density of porous copper structure could be predicted by concentration of solution. These experimental results showed that it was feasible to produce the metal foam-typed structures, and thus it would provide the potential possibilities of additive manufacturing by layering various metal structures. In the future, this process will be applicable to catalyst exchangers, electrodes, filters, and heat exchangers.

키워드

INKNANOPARTICLESFABRICATIONFILM

식별자

Scopus EID
2-s2.0-85051554250
WoS UID
000441627200003