본문 바로가기

Application of segmented rubber rings to increase the sealing efficiency in hydroforming

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q3Scopus Q2
저널
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY32(7) · pp.3153 · 2018
피인용
Web of Science 1Scopus 1KCI 0
FWCI (Scopus)
0
JCR IF
JCR 2017 1.194
ISSN
1738-494X

저자

  1. 정희석제1저자School of Mechanical Engineering, Pusan National University, Busan, South Korea
  2. 한상욱School of Mechanical Engineering, Pusan National University, Busan, South Korea
  3. 나재현School of Mechanical Engineering, Pusan National University, Busan, South Korea
  4. 문영훈교신저자School of Mechanical Engineering, Pusan National University, Busan, South Korea

초록

The tube hydroforming process uses a pressurized fluid as the forming medium, and the sealing efficiency of the internal fluid has an important influence on the hydroformability. This study investigates the applicability of segmented rubber rings to prevent pressure leakage in hydroforming. When the target shape is non-axisymmetric, the possibility of pressure leakage is increased due to the biased stress distribution on the punch. A sealing system is proposed, which is composed of segmented rubber rings, a cylindrical sleeve, and a punch with an end fillet. When the rubber rings are compressed, the reaction force acting on the rings contributes to the prevention of pressure leakage. The circumference of the tube end becomes more tightly sealed by the axial pressure between the punch and sleeve. A deformation analysis was conducted using a compression test, which revealed that the combined use of a steel ring with a rubber ring was more efficient in preventing fluid leakage. The enhanced sealing effect of the proposed system with rubber and steel rings was confirmed by comparing the experimental results with a conventional hydroforming process.

키워드

Tube hydroformingSealingLeakageRubber ringSteel ringEXPERIMENTAL-VERIFICATIONTUBEOPTIMIZATIONSHAPESSYSTEM

식별자

Scopus EID
2-s2.0-85050108154
WoS UID
000439063800019
KCI
ART002363415