Synthesis and cryogenic mechanical properties of CO2-blown carbon-reinforced polyurethane foam
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q3Scopus Q2
- 저널
- JOURNAL OF CELLULAR PLASTICS54(4) · pp.743 · 2018
- 피인용
- Web of Science 9Scopus 10
- FWCI (Scopus)
- 0.57
- JCR IF
- JCR 2017 1.625
- ISSN
- 0021-955X
저자
- 김정현제1저자Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea
- 김종민Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea
- 박성균Department of Physics, Pusan National University, Busan, South Korea
- 박강현Department of Chemistry, Pusan National University, Busan, South Korea
- 이제명교신저자Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea
초록
In the present study, carbon-nanotube-polyurethane foams were synthesized by adding (0.02, 0.1, and 0.3 wt%) carbon nanotubes during the polymerization reaction between polyol and isocyanate liquids. After the synthesis process, the microstructural cell morphology of the carbon-nanotube-polyurethane foams, based on the amount of carbon nanotubes, was observed using field emission scanning electron microscopy. To evaluate the mechanical characteristics of the carbon-nanotube-polyurethane foams, temperature-dependent (20 degrees C, -90 degrees C, and -163 degrees C) compressive tests were performed, and the results were compared to those of the pure polyurethane foam to verify the effectiveness of the developed carbon-nanotube-polyurethane foams. Specifically, the effects of the weight percent of carbon nanotubes, density, and temperature on the overall behavior of the carbon-nanotube-polyurethane foams were considered. Finally, the permanent deformation ratio and material failure characteristics were investigated. The results showed that the cell morphology and compressive strength of the carbon-nanotube-polyurethane foam with 0.02 wt% carbon nanotubes were superior to those of pure polyurethane foam, and these properties showed a significant dependence on the weight percent of carbon nanotubes, test temperatures, and the density.
키워드
Polyurethane foamcarbon reinforcementcryogenicmechanical propertiescompression behaviorNANOTUBESCOMPOSITES
식별자
- Scopus EID
- 2-s2.0-85041901680
- WoS UID
- 000438581300003



로그인
연구물 목록으로