Feasibility studies on manufacturing tailored blanks by rolling partially stacked blanks
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q3Scopus Q2
- 저널
- JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY32(4) · pp.1575 · 2018
- 피인용
- Web of Science 2Scopus 3KCI 0
- FWCI (Scopus)
- 0.27
- JCR IF
- JCR 2017 1.194
- ISSN
- 1738-494X
저자
- 한상욱제1저자School of Mechanical Engineering, Pusan National University, Busan, South Korea
- 황태우School of Mechanical Engineering, Pusan National University, Busan, South Korea
- 오일영School of Mechanical Engineering, Pusan National University, Busan, South Korea
- 문영훈교신저자School of Mechanical Engineering, Pusan National University, Busan, South Korea
초록
Tailored blanks with different blank thicknesses are semi-finished parts that can be used to produce lightweight vehicle parts. This study investigates a manufacturing process that can produce tailored blanks by rolling partially stacked blanks. The process was experimentally and numerically investigated using various processing conditions. To characterize the process, the deformation behaviors of upper and lower blanks were analyzed and quantified. The dimensional variations at the top end and the transition zones were analyzed based on the cross-sectional thickness profiles of formed blanks. The results show that the proposed process is feasible for the production of tailored rolled blanks that have both straight edges with a concave transition zone and convex edges with a straight transition zone.
키워드
Tailored rolled blanksRollingPartially stacked blanksTransition zoneFEMROLLED BLANKWELDED BLANKSOPTIMIZATIONBEHAVIOR
식별자
- Scopus EID
- 2-s2.0-85045642220
- WoS UID
- 000430417300011
- KCI
- ART002332284



로그인
연구물 목록으로