Flow-induced deformation of unidirectional carbon fiber preform during the mold filling stage in liquid composite molding process
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q2
- 저널
- JOURNAL OF COMPOSITE MATERIALS52(9) · pp.1265 · 2018
- 피인용
- Web of Science 14Scopus 18
- FWCI (Scopus)
- 0.69
- JCR IF
- JCR 2017 1.613
- ISSN
- 0021-9983
저자
- 성동기제1저자Department of Polymer Science and Engineering, Pusan National University, South Korea
- Kim, ShinoAircraft Research and Development Division, Korea Aerospace Industries, South Korea
- Um, Moon KwangComposites Research Division, Korea Institute of Materials Science, South Korea
- Song, Young Seok교신저자Department of Fiber System Engineering, Dankook University, South Korea
초록
Liquid composite molding has been developed as a high-speed process for manufacturing automotive lightweight parts using new equipment that applies a high pressure for mixing and injection. One of the technical issues is the deformation of fiber preform during the process, which causes defects in the size, mechanical properties and appearance of the final products. In this study, two types of deformation in unidirectional fiber preform during the mold filling process are investigated, which are rigid body deformation and local deformation. Three important forces, namely friction, in-mold stiffness of fiber preform and resin flow, are measured to investigate the mechanism of the fiber deformation. The magnitude of the forces was compared at an instant, which influenced the types of fiber deformation. The effects of the orientation angle and the volume fraction of fiber preform and flow rate were investigated to identify controllable factors to prevent undesired deformation during the process.
키워드
Liquid composite moldingfiber preformdeformationWOVEN-FABRIC PREFORMSCOMPACTIONSIMULATIONPERMEABILITYPARTRTM
식별자
- Scopus EID
- 2-s2.0-85045247038
- WoS UID
- 000430022700011



로그인
연구물 목록으로