Inductively coupled plasma etching of high-k dielectric HfSiO4 film
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q4Scopus Q4
- 저널
- JOURNAL OF CERAMIC PROCESSING RESEARCH19(1) · pp.65 · 2018
- 피인용
- Web of Science 0Scopus 0KCI 0
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2017 0.327
- ISSN
- 1229-9162
저자
- 최병수제1저자Department of Nano Fusion Technology, Pusan National University, South Korea
- 김해찬Department of Nano Fusion Technology, Pusan National University, South Korea
- 김진곤Department of Nanomechatronics Engineering, Pusan National University, Busan, South Korea
- Kim, Jeong SeogNEXTOP KOREA Co. Ltd, South Korea
- Ryu, Jeong HoDepartment of Materials Science and Engineering, Korea National University of Transportation, Chungbuk, South Korea
- 조현교신저자Department of Nanomechatronics Engineering, Pusan National University, Busan, South Korea
초록
Hafnium silicate (HfSiO4) is one of the leading high-k dielectrics for advanced complementary metal oxide semiconductor field-effect transistors (CMOSFETs) since it can provide the reduced leakage current characteristics while maintaining the same gate capacitance in sub-2 nm equivalent oxide thickness regime. High resolution pattern transfer of the HfSiO4-based gate structure is important to achieve a good device performance. High density plasma etching of the HfSiO4 thin film was performed in Cl-2/Ar and SF6/Ar inductively coupled plasmas (ICPs) and the effect of plasma composition, ICP source power and rf chuck power on the HfSiO4 etch characteristics was studied. As the concentration of fluorine in the SF6/Ar ICP discharges increases, a steady increase of the HfSiO4 etch rate was observed while the HfSiO4 etch rate in the Cl-2/Ar discharges decreased at the chlorine content beyond similar to 33%. For both plasma chemistries, the HfSiO4 etch rate generally increased as the ICP source power or rf chuck power increased under most of the conditions examined and maximum etch rates of similar to 921 angstrom/min and similar to 776 angstrom/min were obtained in the 5SF(6)/10Ar and 5Cl(2)/10Ar ICP discharges, respectively. The 5Cl(2)/10Ar ICP discharges produced better surface morphology with the normalized roughness values in the rage of 0.72-1.32 compared to the 5SF(6)/10Ar plasmas. Highly anisotropic pattern transfer was performed with the 5SF(6)/10Ar ICP discharges.
키워드
HfSiO4 thin filmInductively coupled plasma etchingCl-2/Ar and SF6/Ar inductively coupled plasmasEtch rateanisotropyALTERNATIVE GATE DIELECTRICSELECTRICAL-PROPERTIESTHIN-FILMSSILICON
식별자
- Scopus EID
- 2-s2.0-85045341560
- WoS UID
- 000429662400012
- KCI
- ART002336249



로그인
연구물 목록으로