본문 바로가기

Reconfigurable radio receiver with fractional sample rate converter and multi-rate ADC based on LO-derived sampling clock

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q4Scopus Q3
저널
INTERNATIONAL JOURNAL OF ELECTRONICS105(3) · pp.473 · 2018
피인용
Web of Science 0Scopus 0
FWCI (Scopus)
0
JCR IF
JCR 2017 0.939
ISSN
0020-7217

저자

  1. 박성경제1저자Department of Electronics Engineering, Pusan National University, Busan, South Korea
  2. Park, Chester Sungchung교신저자Department of Electronics Engineering, Konkuk University, Seoul, South Korea

초록

A composite radio receiver back-end and digital front-end, made up of a delta-sigma analogue-to-digital converter (ADC) with a high-speed low-noise sampling clock generator, and a fractional sample rate converter (FSRC), is proposed and designed for a multi-mode reconfigurable radio. The proposed radio receiver architecture contributes to saving the chip area and thus lowering the design cost. To enable inter-radio access technology handover and ultimately software-defined radio reception, a reconfigurable radio receiver consisting of a multi-rate ADC with its sampling clock derived from a local oscillator, followed by a rate-adjustable FSRC for decimation, is designed. Clock phase noise and timing jitter are examined to support the effectiveness of the proposed radio receiver. A FSRC is modelled and simulated with a cubic polynomial interpolator based on Lagrange method, and its spectral-domain view is examined in order to verify its effect on aliasing, nonlinearity and signal-to-noise ratio, giving insight into the design of the decimation chain. The sampling clock path and the radio receiver back-end data path are designed in a 90-nm CMOS process technology with 1.2V supply.

키워드

Reconfigurable radiomulti-rate ADCLO-derived sampling clockfractional sample rate converter (FSRC)cubic interpolatorsoftware-defined radioaliasingDIGITAL MODEMSDESIGNINTERPOLATION

식별자

Scopus EID
2-s2.0-85029578039
WoS UID
000419612600009