본문 바로가기

High performance Sb2S3/carbon composite with tailored artificial interface as an anode material for sodium ion batteries

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
METALS AND MATERIALS INTERNATIONAL23(6) · pp.1241 · 2017
피인용
Web of Science 23Scopus 23KCI 1
FWCI (Scopus)
1.13
JCR IF
JCR 2016 1.889
ISSN
1598-9623

저자

  1. 최정희제1저자School of Materials Science and Engineering, Pusan National University, Busan, South Korea
  2. Ha, Chung-WanBattery Research Center, Korea Electrotechnology Research Institute, Changwon, South Korea
  3. Choi, Hae-YoungBattery Research Center, Korea Electrotechnology Research Institute, Changwon, South Korea
  4. 신헌철School of Materials Science and Engineering, Pusan National University, Busan, South Korea
  5. Lee, Sang-Min교신저자Battery Research Center, Korea Electrotechnology Research Institute, Changwon, South Korea

초록

The electrochemical comparison between Sb2S3 and its composite with carbon (Sb2S3/C) involved by sodium ion carrier are explained by enhanced kinetics, particularly with respect to improved interfacial conductivity by surface modulation by carbon. Sb2S3 and Sb2S3/C are synthesized by a high energy mechanical milling process. The successful synthesis of these materials is confirmed with X-ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy (TEM). As an anode material for sodium ion batteries, Sb2S3 exhibits an initial sodiation/desodiation capacity of 1,021/523 mAh g(-1) whereas the Sb2S3/C composite exhibits a higher reversible capacity (642 mAh g(-1)). Furthermore, the cycle performance and rate capability of the Sb2S3/C composite are estimated to be much better than those of Sb and Sb2S3. Electrochemical impedance spectroscopy analysis shows that the Sb2S3/C composite exhibited charge transfer resistance and surface film resistance much lower than Sb2S3. X-ray photoelectron spectroscopy analyses of both electrodes demonstrate that NaF layer on Sb2S3/C composite electrode leads to the better electrochemical performances. In order to clarify the electrochemical reaction mechanism, ex-situ XRD based on differential capacity plots and ex-situ HR-TEM analyses of the Sb2S3/C composite electrode are carried out and its reaction mechanism was established.

키워드

energy storage materialsintermetallicscompositesmechanical alloying/millingelectrochemistryRECHARGEABLE LITHIUM BATTERIESLI-IONSBELECTRODESMECHANISMSTORAGE

식별자

Scopus EID
2-s2.0-85034605679
WoS UID
000415340300022
KCI
ART002281274