본문 바로가기

Wear behaviors of pure aluminum and extruded aluminum alloy (AA2024-T4) under variable vertical loads and linear speeds

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
METALS AND MATERIALS INTERNATIONAL23(6) · pp.1097 · 2017
피인용
Web of Science 16Scopus 15KCI 5
FWCI (Scopus)
0.52
JCR IF
JCR 2016 1.889
ISSN
1598-9623

저자

  1. 정제기제1저자Department of Materials Science and Engineering, Pusan National University, Busan, South Korea
  2. Oak, Jeong-JungMaterial Analysis Laboratory, DAE-IL Corporation, Ulsan, South Korea
  3. 김용환Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang, South Korea
  4. 조의제Department of Materials Science and Engineering, Pusan National University, Busan, South Korea
  5. 박용호교신저자Department of Materials Science and Engineering, Pusan National University, Busan, South Korea

초록

The aim of this study was to investigate the transition of wear behavior for pure aluminum and extruded aluminum alloy 2024-T4 (AA2024-T4). The wear test was carried using a ball-on-disc wear testing machine at various vertical loads and linear speeds. The transition of wear behaviors was analyzed based on the microstructure, wear tracks, wear cross-section, and wear debris. The critical wear rates for each material are occurred at lower linear speed for each vertical load. The transition of wear behavior was observed in which abrasion wears with the generation of an oxide layer, fracture of oxide layer, adhesion wear, severe adhesion wear, and the generation of seizure occurred in sequence. In case of the pure aluminum, the change of wear debris occurred in the order of blocky, flake, and needle-like debris. Cutting chip, flake-like, and coarse flake-like debris was occurred in sequence for the extruded AA2024-T4. The transition in the wear behavior of extruded AA2024-T4 occurred slower than in pure aluminum.

키워드

alloysextrusionwearscanning electron microscopy (SEM)wear mapDRY SLIDING WEARAL-SI ALLOYSMATRIX COMPOSITESDUCTILE MATERIALSGRAIN-REFINEMENTHEAT-TREATMENTMICROSTRUCTUREREINFORCEMENTPARTICLESEXTRUSION

식별자

Scopus EID
2-s2.0-85034585702
WoS UID
000415340300004
KCI
ART002281256