Compositionally modulated multilayer diamond-like carbon coatings with AlTiSi multi-doping by reactive high power impulse magnetron sputtering
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- APPLIED SURFACE SCIENCE425 · pp.855 · 2017
- 피인용
- Web of Science 28Scopus 28
- FWCI (Scopus)
- 0.34
- JCR IF
- JCR 2016 3.387
- ISSN
- 0169-4332
저자
- 다이 웨이제1저자교신저자Institute of Materials Technology, Pusan National University, Busan, South Korea
- Gao, XiangSchool of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, China
- Liu, JingmaoSchool of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, China
- 권세훈School of Materials Science and Engineering, Pusan National University, Busan, South Korea
- Wang, QiminSchool of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, China
초록
Diamond-like carbon (DLC) coatings with AlTiSi multi-doping were prepared by a reactive high power impulse magnetron sputtering with using a gas mixture of Ar and C2H2 as precursor. The composition, microstructure, compressive stress, and mechanical property of the as-deposited DLC coatings were studied systemically by using SEM, XPS, TEM, Raman spectrum, stress-tester, and nanoindentation as a function of the Ar fraction. The results show that the doping concentrations of the Al, Ti and Si atoms increased as the Ar fraction increased. The doped Ti and Si preferred to bond with C while the doped Al mainly existed in oxidation state without bonding with C. As the doping concentrations increased, TiC carbide nanocrystals were formed in the DLC matrix. The microstructure of coatings changed from an amorphous feature dominant AlTiSi-DLC to a carbide nanocomposite AlTiSi-DLC with TiC nanoparticles embedding. In addition, the coatings exhibited the compositionally modulated multilayer consisting of alternate Al-rich layer and Al-poor layer due to the rotation of the substrate holder and the diffusion behavior of the doped Al which tended to separate from C and diffuse towards the DLC matrix surface owing to its weak interactions with C. The periodic Al-rich layer can effectively release the compressive stress of the coatings. On the other hand, the hard TiC nanoparticles were conducive to the hardness of the coatings. Consequently, the DLC coatings with relatively low residual stress and high hardness could be acquired successfully through AlTiSi multi-doping. It is believed that the AlCrSi multi-doping may be a good way for improving the comprehensive properties of the DLC coatings. In addition, we believe that the DLC coatings with Al-rich multilayered structure have a high oxidation resistance, which allows the DLC coatings application in high temperature environment. (C) 2017 Elsevier B.V. All rights reserved.
키워드
Diamond-like carbonMulti-dopingModulation multilayered structurePropertyMECHANICAL-PROPERTIESNANOCOMPOSITE COATINGSTHIN-FILMSMICROSTRUCTURESILICONGROWTH
식별자
- Scopus EID
- 2-s2.0-85025074064
- WoS UID
- 000410609400105



로그인
연구물 목록으로