본문 바로가기

Rheological Characterization of Powder Mixture Including a Space Holder and Its Application to Metal Injection Molding

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q3
저널
METALS7(4) · 2017
피인용
Web of Science 11
JCR IF
JCR 2016 1.984
ISSN
2075-4701

저자

  1. 박상준제1저자School of Mechanical Engineering, Pusan National University, Busan, South Korea
  2. 김동영School of Mechanical Engineering, Pusan National University, Busan, South Korea
  3. Lin, DongguoDepartment of Mechanical Engineering, Pohang University of Science and Technology, Pohang, South Korea
  4. Park, Seong JinDepartment of Mechanical Engineering, Pohang University of Science and Technology, Pohang, South Korea
  5. 안석영교신저자School of Mechanical Engineering, Pusan National University, Busan, South Korea

초록

Metal injection molding (MIM) with the space holder technique is becoming one of the important fabrication methods for a net-shape production of micro-sized, porous, complex-shaped metal parts. For a successful injection molding step, rheological behavior of MIM feedstock is essential, which includes peculiar characteristics, such as a wall slip phenomenon. SUS 316L stainless steel powder, binder systems (paraffin wax, polypropylene, polyethylene, stearic acid) and three different sizes of spherically-shaped polymethyl methacrylate (PMMA) as a space-holder were used for this study. The porosity was controlled by varying the volume fraction of the space holder and a total of six different feedstocks were prepared. Rheological characteristics of the feedstock was investigated, especially on viscosities, including wall slip quantification by using a capillary rheometer. By thermogravimetric analysis, the debinding process for completely removing the space holder was proposed. Finally, the shrinkage and porosity of the tensile specimen produced through the sintering process were analyzed and the ultimate tensile strength was obtained.

키워드

metal injection moldingrheological characterizationfeedstock rheologyspace holderporous metal injection moldingslip phenomenahighly-filled suspension flow

식별자

WoS UID
000404051600014