본문 바로가기

Numerical study of erosion in critical components of subsea pipeline: tees vs bends

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q2
저널
SHIPS AND OFFSHORE STRUCTURES12(2) · pp.233 · 2017
피인용
Web of Science 27
JCR IF
JCR 2016 1.387
ISSN
1744-5302

저자

  1. Pouraria, H제1저자부산대학교, 공과대학, 조선·해양공학과, KO
  2. 서정관교신저자부산대학교, 연구원, 선박해양플랜트기술연구원, KO
  3. 백점기부산대학교, 공과대학, 조선·해양공학과, KO

초록

Elbows are a vulnerable part of piping systems in erosive environments. Traditionally, plugged tees are used instead of elbows when the erosion rate is high. However, the advantage of plugged tees over elbows in large-scale pipelines is unclear. A comprehensive computational fluid dynamics study was carried out to predict the erosion rate in plugged tees and elbows. A numerical method was first used for aluminium elbows and tees with available experimental data through which the accuracy of the numerical solution was verified. After validating the model, numerical modelling was used to compare the erosion rates of plugged tees and elbows in varying geometrical conditions, ranging from 0.0254 to 0.6m diameter carbon steel pipes transmitting multiphase gas/sand flow. The effects of internal flow velocity and sand particle size on erosion rates were also investigated. The numerical results revealed that the erosion ratio between plugged tees and elbows strongly depends on the internal diameter of the pipe, the flow velocity and particle size. Hence, the influence of these parameters should be considered for proper selection of the fittings to be used. Finally, numerical modelling of erosion in two subsea jumpers outfitted with standard elbows and plugged tees was presented.

키워드

numerical modellingCFDerosionsubsea pipelineelbow2-PHASE FLOWPLUGGED TEESELBOWSPREDICTIONSYSTEMSOIL

식별자

WoS UID
000392622700008