본문 바로가기

Integrated hot forming and heat treatment process on Al6061 tailor rolled blank

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q2Scopus Q1
피인용
Web of Science 13KCI 1
JCR IF
JCR 2016 1.497
ISSN
2234-7593

저자

  1. 김재홍제1저자부산대학교, 공과대학, 기계공학부, 지능형제조시스템전공, KO
  2. Lee, Chan-Joo한국생산기술연구원, Dongnam Reg Div, 189 Dongjin Ro, KO
  3. Lee, Seon-Bong계명대학교, Fac Mech & Automot Engn, 1095 Dalgubeol Daero, KO
  4. 고대철부산대학교, 나노과학기술대학, 나노메카트로닉스공학과, KO
  5. 김병민교신저자부산대학교, 공과대학, 기계공학부, 지능형제조시스템전공, KO

초록

Using the cold stamping process, aluminum tailor rolled blanks (TRB) have been recently used to manufacture automotive parts to reduce the body weight of cars. However, when used to achieve uniform mechanical properties, the conventional method of aluminum TRB leads to low formability and excessive springback, and it also requires additional heat treatment because of thickness difference and work hardening during the rolling process. This study proposed an integrated hot forming and heat treatment process to improve the formability and dimensional accuracy of Al6061 TRB. In this process, the heated sheet was immediately formed after the solution heat treatment, and was then rapidly quenched within cold dies. The practicality of this process for sheet forming of Al6061 TRB was evaluated by performing the Erichsen and V-bending tests. Furthermore, hardness was measured to confirm the uniform mechanical properties of the Al6061 TRB achieved after artificial and natural aging. The integrated hot forming and heat treatment process was also compared with the conventional forming method in terms of formability, dimensional accuracy, and mechanical properties, which demonstrated the feasibility of this process for Al6061 TRB.

키워드

Integrated processDie quenchingTailor rolled blankFormabilityDimensional accuracyMechanical propertyALUMINUM-ALLOY SHEETBEHAVIORLIMIT

식별자

WoS UID
000392287600016
KCI
ART002186167