본문 바로가기

New load distribution method for one-row slewing ball bearing considering retainer force

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q2Scopus Q1
피인용
Web of Science 4KCI 0
JCR IF
JCR 2016 1.497
ISSN
2234-7593

저자

  1. 유용훈제1저자부산대학교, 공과대학, 기계공학부, 지능형제조시스템전공, KO
  2. 이보라부산대학교, 공과대학, 기계공학부, 지능형제조시스템전공, KO
  3. 조용주교신저자부산대학교, 공과대학, 기계공학부, 지능형제조시스템전공, KO

초록

This paper studied the load distribution for one-row slewing ball bearing. The contact force between the balls and raceways is calculated based on Hertz contact theory. The retainer force was considered for satisfying the force equilibrium of the balls because the contact forces from two raceways are not on the same plane. Also, there is no reaction moment for each raceway in the axial direction, so each raceway freely rotates about each axial axis. The direction of relative displacement of the two raceways is shown to differ from the direction of combined loads due to contact geometric nonlinearity of the slewing bearing. The retainer reduces the number of contact balls in the slewing bearing, so the maximum contact load increases compared to when the retainer is not considered.

키워드

Load distributionSlewing bearing4-pointHertz contactRetainer forceGEOMETRY PARAMETERSCONTACTANGLECAPACITYRACEWAY

식별자

WoS UID
000392287600006
KCI
ART002186133