본문 바로가기

Optimization of conductivity and strength in Cu-Ni-Si alloys by suppressing discontinuous precipitation

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
METALS AND MATERIALS INTERNATIONAL22(6) · pp.1049 · 2016
피인용
Web of Science 44KCI 3
JCR IF
JCR 2015 1.815
ISSN
1598-9623

저자

  1. 한승전제1저자한국기계연구원부설 재료연구소
  2. 이재현교신저자창원대학교
  3. 임성환강원대학교
  4. 안지혁한국기계연구원부설 재료연구소
  5. 김광호부산대학교
  6. 김상식교신저자경상대학교

초록

Cu-Ni-Si alloys with and without Ti were solution treated at 980 A degrees C for 1 h and cooled by air cooling and water quenching, after which the specimens were aged at 500 A degrees C. The two alloys showed different aging characteristics with different cooling rates during the aging process. The conductivity of all alloys increased during aging; for alloys that were water quenched, hardness increased at the early stage of aging and then drastically decreased. The air-cooled Cu-Ni-Si alloy without Ti also experienced an increase in hardness, which then decreased during aging, but the air-cooled Cu-Ni-Si alloy with Ti did not show a drastic decrease in hardness during prolonged aging. A combination of yield strength and conductivity of 820 MPa and 42% IACS, respectively, was achieved in the air-cooled Cu-Ni-Si-Ti alloy after solution treatment.

키워드

Cu-Ni-Si alloydiscontinuous precipitationaginghigh conductivityhigh strengthcooling rateMECHANICAL-PROPERTIESELECTRICAL-PROPERTIESMICROSTRUCTUREBEHAVIOR

식별자

WoS UID
000387223500015
KCI
ART002164228