High-speed camera analysis for nanoparticles produced by using a pulsed wire-discharge method
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q4Scopus Q4
- 저널
- JOURNAL OF THE KOREAN PHYSICAL SOCIETY69(1) · pp.36 · 2016
- 피인용
- Web of Science 1KCI 0
- JCR IF
- JCR 2015 0.445
- ISSN
- 0374-4884
저자
초록
We investigated the performance of a high-speed camera and the nanoparticle size distribution to quantify the mechanism of synthesized nanoparticle formation in a pulsed wire discharge (PWD) experiment. The Sn-58Bi alloy wire was 0.5 mm in diameter and 32 mm long; it was prepared in the PWD chamber, and the evaporation explosion process was observed by using a high-speed camera. In order to vary the conditions and analyze the mechanisms of nanoparticle synthesis in the PWD, we changed the pressure of the N-2 gas in the chamber from 25 to 75 kPa. To synthesize nanoparticles on a nano-scale, we fixed the charging voltage at 6 kV, and the high-speed camera captured pictures at 22,500 frames per second. The experimental results show that the electronic explosion process at different N-2 gas pressures can be characterized by using the explosion's duration and the explosion's intensity. The experiments at the lowest pressure exhibited a longer explosion duration and a greater intensity. Also, at low pressure, very small nanoparticles with a good dispersion were produced.
키워드
Pulsed wire dischargeNanoparticleHigh-speed cameraSN-AG-CUCOMPOSITE SOLDERSMICROSTRUCTUREADDITIONSALLOYZNNANOPOWDERSPARTICLESGROWTHJOINTS
식별자
- WoS UID
- 000379709900007
- KCI
- ART002128502



로그인
연구물 목록으로