Design and Control Method for Sub-module DC Voltage Ripple of HVDC-MMC
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q3Scopus Q3
- 저널
- Journal of Electrical Engineering & Technology11(4) · pp.921 · 2016
- 피인용
- Web of Science 1KCI 1
- JCR IF
- JCR 2015 0.679
- ISSN
- 1975-0102
저자
초록
This paper proposes a design and control method for a high-voltage direction current modular multilevel converter (HVDC-MMC) considering the capacitor voltage ripple of the sub-module (SM). The capacitor voltage ripple consists of the line frequency and double-line- frequency components. The double line-frequency component does not fluctuate according to the active power, whereas the line-frequency component is highly influenced by the grid-side voltage and current. If the grid voltage drops, a conventional converter increases the current to maintain the active power. A grid voltage drops, current increment, or both occur with a capacitor voltage ripple higher than the limit value. In order to reliably control an MMC within a limit value, the SM capacitor should be designed on the basis of the capacitor voltage ripple. In this paper, the capacitor voltage ripple according to the grid voltage and current are analyzed, and the proposed control method includes a current limitation method considering the capacitor voltage ripple. The proposed design and control method are verified through simulation using PSCAD/EMTDC.
키워드
Capacitor voltage rippleCapacitor design methodCurrent limit methodDouble-line frequencyModular multilevel converter (MMC)MULTILEVEL CONVERTERSYSTEMFREQUENCY
식별자
- WoS UID
- 000378222100015
- KCI
- ART002115468



로그인
연구물 목록으로