본문 바로가기

Microstructure and Mechanical Properties of TiB-Containing Al-Zn Binary Alloys

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY32(7) · pp.653 · 2016
피인용
Web of Science 35
JCR IF
JCR 2015 2.267
ISSN
1005-0302

저자

  1. 신상수제1저자부산대학교, 공과대학, 재료공학부, KO
  2. Yeom, Gil-Yong한국생산기술연구원, Liquid Proc & Casting Technol R&BD Grp, KO
  3. Kwak, Tae-Yang한국생산기술연구원, Liquid Proc & Casting Technol R&BD Grp, KO
  4. 박익민교신저자부산대학교, 공과대학, 재료공학부, 금속공학전공, KO

초록

The microstructure and mechanical properties of newly developed Al-35Zn cast alloys with TiB refiner addition were evaluated by X-ray diffractometry, optical microscopy, and scanning electron microscopy coupled with energy dispersive spectrometry. The microstructure of these alloys featured alpha-Al dendrites surrounded by Al-Zn (alpha + eta) eutectic structures. After the addition of TiB refiner, the alloy grain sizes decreased, and its morphology abruptly changed from dendritic to equiaxed grains. Such an improved microstructure of the modified alloys was accompanied by a significant increase in the tensile strength and elongation percentage compared to those of the Al-Zn or Zn-Al-based alloys. The results showed that with the increase of TiB content up to 0.05%, the morphology of alpha-Al dendrites and alpha + eta phases changed from coarse dendrite and lamellar structures into independent and fine ones. Based on these results, the effect of TiB refiner addition on the microstructure and mechanical properties of the Al-35Zn binary alloys was investigated. Copyright (C) 2016, The editorial office of Journal of Materials Science & Technology. Published by Elsevier Limited.

키워드

Al-Zn(Cu) alloyEutectic structureHigh strengthTiB2ALUMINUM-ALLOYSGRAIN-REFINEMENTHETEROGENEOUS NUCLEATIONWEAR PROPERTIESSLIDING WEARCOOLING RATECASTBEHAVIORSOLIDIFICATIONELEMENTS

식별자

WoS UID
000378171400011