Development of a perpendicular vibration-induced electrical discharge machining process for fabrication of partially wavy inner structures
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q3Scopus Q2
- 저널
- JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY30(5) · pp.2257 · 2016
- 피인용
- Web of Science 1KCI 0
- JCR IF
- JCR 2015 0.761
- ISSN
- 1738-494X
저자
초록
Heat transfer enhancement is an important issue in energy systems. To improve the efficiency of a cooling channel used inside injection molds, turbine blades, and high-temperature devices, channels with various shapes, such as wavy, elliptical, and twisted, have been studied. A cooling channel with a partially wavy inner structure has shown outstanding cooling performance despite a small increase in friction factor. However, generating a partially wavy inner structure inside a channel through conventional machining processes is not easy. To address this problem, we developed a new process called Perpendicular vibration-induced electrical discharge machining (PV-EDM). A specific electrode and one- and random-directional vibrating devices controlled by a pneumatic load were designed for the PV-EDM process. Experimental results showed that local shaping on the inner wall of a channel is possible, which confirmed the possibility of application of this process to actual industrial problems.
키워드
Perpendicular vibration-induced EDMWavy inner structuresCooling channelEnergy savingHeat transfer enhancementHEAT-TRANSFERSURFACE FINISHDESIGNMODELEDMTEMPERATUREROUGHNESSCHANNEL
식별자
- WoS UID
- 000377263200035
- KCI
- ART002104935



로그인
연구물 목록으로