Dynamic shear strength of unreinforced and Hairpin-reinforced cast-in-place anchors using shaking table tests
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q3Scopus Q2
- 저널
- STRUCTURAL ENGINEERING AND MECHANICS58(1) · pp.39 · 2016
- 피인용
- Web of Science 1KCI 0
- JCR IF
- JCR 2015 1.021
- ISSN
- 1225-4568
저자
초록
Since the publication of ACI 318-02, the concrete capacity design (CCD) method has been used to determine the resistance of unreinforced concrete anchors. The regulation of steel-reinforced anchors was proposed in ACI 318-08. Until ACI 318-08, the shear resistance of concrete breakout for an unreinforced anchor during an earthquake was reduced to 75% of the static shear strength, but this reduction has been eliminated since ACI 318-11. In addition, the resistance of a hairpin-reinforced anchor was calculated using only the strength of the steel, and a regulation on the dynamic strength was not given for reinforced anchors. In this study, shaking table tests were performed to evaluate the dynamic shear strength of unreinforced and hairpin-reinforced cast-in-place (CIP) anchors during earthquakes. The anchors used in this study were 30 mm in diameter, with edge distances of 150 mm and embedment depths of 240 mm. The diameter of the hairpin steel was 10 mm. Shaking table tests were carried out on two specimens using the artificial earthquake, based on the United States Nuclear Regulatory Commission (US NRC)'s Regulatory Guide 1.60, and the Northridge earthquake. The experimental results were compared to the current ACI 318 and ETAG 001 design codes.
키워드
cast-in-place anchorunreinforced anchorhairpin-reinforced anchordynamic shear strengthshaking table tests
식별자
- WoS UID
- 000377144400003
- KCI
- ART002090665



로그인
연구물 목록으로