본문 바로가기

Effects of cryogenic thermal cycle and immersion on the mechanical characteristics of phenol-resin bonded plywood

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q3Scopus Q2
저널
CRYOGENICS72 · pp.90 · 2015
피인용
Web of Science 23
JCR IF
JCR 2014 1.168
ISSN
0011-2275

저자

  1. 김정현제1저자부산대학교, 공과대학, 재료공학부, KO
  2. 박두환부산대학교, 공과대학, 재료공학부, KO
  3. 이치승부산대학교, 공과대학, 조선·해양공학과, KO
  4. Park, Kwang-Jun대우, Gas Technol R&D Grp, KO
  5. 이제명교신저자부산대학교, 공과대학, 조선·해양공학과, KO

초록

The main objective of the present study is to investigate the performance degradation of the plywood used in a liquefied natural gas (LNG) cargo containment system (CCS). A plywood sheet features an odd number of thinly layered wooden plies bonded perpendicularly to the previous layer to give it a very strong and durable structure. Owing to this strong point, plywood is applied to a variety of interior and exterior applications. Above all, it is widely adopted as insulation panels in an LNG CCS owing to a high stiffness with low density and its superior mechanical capabilities. As an insulation material of an LNG CCS, plywood is constantly exposed to repeated wave-induced thermal variations caused by the loading (-163 degrees C) and unloading (20 degrees C) of LNG during general operating periods of 25 years on average. Therefore, the effects of cryogenic-level thermal loads on the material characteristics of plywood must be analyzed with respect to the design and safety aspects of LNG CCSs. In the present study, the influences of the estimated thermal load, testing temperature, and grain orientation on plywood adopted in an LNG CCS are investigated. In terms of safety and design, the repeated thermal loads in a LNG CCS must be considered because the modulus of elasticity (MOE), tensile strength (TS), and modulus of rupture (MOR) are degraded by thermal treatments, such as cyclic thermal-shock and cryogenic immersion. (C) 2015 Elsevier Ltd. All rights reserved.

키워드

PlywoodLiquefied natural gasCargo containment systemCryogenic thermal cycleCryogenic immersionFORMALDEHYDE RESINWOODLNGOPTIMIZATIONTEMPERATURESTRENGTH

식별자

WoS UID
000367482800012