Ductile mode machining of the micro pattern made on YSZ using ultra-precision shaping with a diamond tool
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q4Scopus Q3
- 저널
- JOURNAL OF THE KOREAN PHYSICAL SOCIETY67(11) · pp.1961 · 2015
- 피인용
- Web of Science 4KCI 1
- JCR IF
- JCR 2014 0.418
- ISSN
- 0374-4884
저자
- 최환진제1저자한국기계연구원
- 전은채교신저자한국기계연구원
- 제태진한국기계연구원
- 김정환한국기계연구원
- 최대희한국과학기술원
- 신보성부산대학교
- 정우철Korea Advanced Institute of Science and Technology
- 이윤희한국표준과학연구원
초록
Yttria stabilized zirconia (YSZ), which is a ceramic material, has a number of applications such as a refractory, thermal barrier coating and as a solid electrolyte for a solid oxide fuel cell (SOFC). Micro patterning the YSZ can increase the efficiency of the SOFC, but YSZ is difficult to mechanically machin. A few researchers have reported that an ultra-fine pattern can be mechanically machined on ceramic materials with no brittle fracture with a depth of cut close to sub-micrometers (called ductile mode machining). In the present study, the conditions for ductile mode machining of YSZ were studied. A 3-axis ultra-precision machine system and 90A degrees diamond tool were employed to machine a micro pattern on YSZ. At first, when YSZ was machined with a depth of cut of 1 mu m and 10 passes, the micro pattern was entirely fractured due to the brittleness of YSZ. Next, the micro pattern was machined with a depth of cut of 1 mu m and 1 pass to verify how multi-pass machining affected the brittle fracture. A sparse brittle fracture occurred, which meant the depth of cut of 1 mu m was too large for ductile mode machining. A mix of ductile mode machining and brittle mode machining was observed. Thirdly, when YSZ was machined with a depth of cut of 0.5 mu m by 20 passes, the micro pattern was clearly machined with ductile mode machining. Thus, a transition point between ductile mode machining and brittle mode machining should exist at a depth of cut between 0.5 mu m and 1 mu m. A nanoscrach test was used to determine the transition point. The transition point was found to be 875 nm by analyzing the lateral force and the machined surface.
키워드
YSZDuctile mode machiningMicro patternDiamond toolUltra precision shapingZIRCONIA
식별자
- WoS UID
- 000365816300013
- KCI
- ART002055988



로그인
연구물 목록으로