본문 바로가기

Properties of CaO-SiO2 nanocomposites prepared on pure magnesium by using a sol-gel dip-coating technique

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q4Scopus Q3
저널
JOURNAL OF THE KOREAN PHYSICAL SOCIETY67(11) · pp.1925 · 2015
피인용
Web of Science 5KCI 0
JCR IF
JCR 2014 0.418
ISSN
0374-4884

저자

  1. 구성모제1저자부산대학교
  2. 김가람부산대학교
  3. 장춘화부산대학교
  4. 김혜성교신저자부산대학교
  5. 조권구경상대학교

초록

A CaO-SiO2 layer was deposited on a pure magnesium substrate that had been prepared by using the spark plasma sintering of atomized powders via a sol-gel process. Various concentrations of tetraethyl orthosilicate (TEOS) were added during the synthesis of the CaO-SiO2 nanocomposites on the pure magnesium substrate; the effects of the TEOS concentration on the corrosion protection and the adhesive properties of the material were investigated. The total thickness of the coating layer ranged from approximately 6 to 10 mu m and was affected by the TEOS concentration. Despite the slight surface cracking that occurred on the coating as a result of the strain induced by the annealing process during the deep coating procedure, excellent corrosion and adhesive properties were observed when the TEOS concentration was higher than 15 vol%. When the TEOS concentration was increased to 15 vol%, the corrosion resistance was enhanced, but the adhesive strength was unaffected. Therefore, to produce a CaO-SiO2 coating on pure magnesium for bio-applications, we consider the optimal TEOS concentration to be higher than 15%.

키워드

Biological engineeringSol-gel processingAdhesion structural mechanicsCorrosion protectionALLOYSCORROSIONBEHAVIORMETAL

식별자

WoS UID
000365816300006
KCI
ART002055978