본문 바로가기

Effects of PWHT Time on Pitting Behavior in Modified 9Cr-1Mo Steel Welds

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q1Scopus Q2
저널
Korean Journal of Metals and Materials53(11) · pp.785 · 2015
피인용
Web of Science 2KCI 4
JCR IF
JCR 2014 1.405
ISSN
1738-8228

저자

  1. 안성용제1저자부산대학교
  2. 이명진부산대학교
  3. 조경목교신저자부산대학교
  4. 강남현교신저자부산대학교

초록

The effect of PWHT time on the pitting behavior in NaCl solution was evaluated in the weld of Mod. 9Cr-1Mo steels. Specimens were fabricated using autogeneous gas tungsten arc welding (GTAW) and tested using various post weld heat treatment (PWHT) times (i.e., 30 min, 1 h, and 2 h). More retained delta-ferrite was produced adjacent to the fusion line than the weld center. The polarization curves shifted to low E-corr, and large I-corr, therefore decreasing the pitting corrosion resistance of the weld as the PWHT holding time increased. The 'as-welded' specimens showed random pitting at the martensite lath. With increasing PWHT time, pitting was also found at the delta-ferrite/tempered martensite (delta/TM) interface. This is because more coarse and dense Cr-rich M23C6 carbides were formed along the delta/TM interface than at the TM/TM interface as the PWHT holding time increased.

키워드

metalsweldingcorrosiontransmission electrn microscopy (TEM)Mod. 9Cr-1Mo steel9-12-PERCENT-CR STEELSHEAT-TREATMENTMICROSTRUCTURECREEPEVOLUTIONMETAL

식별자

WoS UID
000364983900004
KCI
ART002047182