Synthesis and densification of nano-crystalline hafnium carbide powder
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- JOURNAL OF THE EUROPEAN CERAMIC SOCIETY35(15) · pp.4073 · 2015
- 피인용
- Web of Science 51
- JCR IF
- JCR 2014 2.947
- ISSN
- 0955-2219
저자
- Feng, Lun제1저자School of Materials Science and Engineering, Pusan National University, Busan, South Korea
- Lee, Sea-Hoon교신저자Division of Powder/Ceramics Research, Korea Institute of Materials Science, Changwon, South Korea
- Wang, HailongSchool of Materials Science and Engineering, Zhengzhou University, Zhengzhou, China
- 이희수School of Materials Science and Engineering, Pusan National University, Busan, South Korea
초록
Ultra-fine hafnium carbide powder was synthesized by the carbothermal reduction of HfO2 at 1600 degrees C using the modified spark plasma sintering (SPS) apparatus. The synthesized powder had a fine particle size of about 125 nm and a low oxygen content of below 0.5 wt%. The purity of the powder was >99.9% excluding Zr, and 99.6% when including Zr impurity. The intermediate reactions and particle growth were minimized due to the low synthesis temperature, fast heating/cooling rate and the effect of current during the modified SPS process. A relatively large amount of HfC powder could be synthesized by the new synthesis method (>175 g/day). HfC ceramics with high relative density (>96%) were obtained after sintering the synthesized powder without sintering additives at 2300 degrees C for 30 mm under 100 MPa pressure by SPS. The average grain size of the obtained specimen was about 6 mu m. (C) 2015 Elsevier Ltd. All rights reserved.
키워드
Hafnium carbidesNanoparticlesSynthesisSpark plasma sinteringDensificationZIRCONIUM CARBIDESINTERING PROCESSPLASMABEHAVIORHFC
식별자
- WoS UID
- 000361575800002



로그인
연구물 목록으로