A temperature- and strain-rate-dependent isotropic elasto-viscoplastic model for glass-fiber-reinforced polyurethane foam
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- MATERIALS & DESIGN84 · pp.163 · 2015
- 피인용
- Web of Science 22
- JCR IF
- JCR 2014 3.501
- ISSN
- 0264-1275
저자
- 이치승제1저자Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea
- 김명성Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea
- 박성보Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea
- 김정현Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea
- Bang, Chang-SeonCryogenic Research Development Center, Samsung Heavy Industries Co., Ltd., Geoje, South Korea
- 이제명교신저자Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea
초록
The primary aim of the present study is to provide a new constitutive model and its computational procedure for a glass-fiber-reinforced polyurethane foam (RPUF) subjected to various cryogenic temperatures and compressive loading rates. A Frank-Brockman-type isotropic elasto-viscoplastic model was introduced to describe the hardening and softening phenomena of RPUF under compressive loads. In addition, the increase of the yield strength and plateau according to the change of temperature and strain rates was demonstrated using the given constitutive model. The introduced numerical model was transformed as an implicit form and was implemented into a user-defined subroutine of commercial finite element analysis (FEA) code, i.e., ABAQUS UMAT. Based on the developed material library, the complex elasto-plastic behavior of RPUF under various cryogenic temperatures and strain rates was numerically estimated. The variation of material internal variables, such as hardening and softening control parameters, was quantitatively investigated, and the temperature- and strain-rate-dependent empirical formulae, namely, a polynomial multiple regression model, were proposed. Finally, the simulation results were compared with a series of compressive test results to validate the proposed method. On using the developed numerical method, it might be feasible to predict the unknown stress-strain behavior of RPUF under arbitrary severe environments.
키워드
Glass-fiber-reinforced polyurethane foamCryogenic temperaturesConstitutive modelingFinite element analysisABAQUS user-defined subroutine UMATDEFINED MATERIAL SUBROUTINEAUSTENITIC STAINLESS-STEELVISCOPLASTIC DAMAGE MODELCONSTITUTIVE-EQUATIONSCRYOGENIC TEMPERATURESELASTOPLASTICITYPOLYMERSBEHAVIOR
식별자
- WoS UID
- 000361147600041



로그인
연구물 목록으로