본문 바로가기

Effect of Si addition on the microstructure, mechanical properties and tribological properties of Zr-Si-N nanocomposite coatings deposited by a hybrid coating system

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
SURFACE & COATINGS TECHNOLOGY259 · pp.707 · 2014
피인용
Web of Science 40
JCR IF
JCR 2013 2.199
ISSN
0257-8972

저자

  1. 최하송제1저자부산대학교, 공과대학, 재료공학부, KO
  2. 장재호부산대학교, KO
  3. Zhang, T부산대학교, KO
  4. Kim, Jun-Ho한국생산기술연구원, KO
  5. Park, In-Wook한국생산기술연구원, KO
  6. 김광호교신저자부산대학교, 공과대학, 재료공학부, 무기재료공학전공, KO

초록

Zr-Si-N coatings with various Si contents were synthesized by a hybrid coating system combining arc ion plating and d.c. magnetron sputtering techniques. The influence of the Si content on the microstructure, mechanical properties and tribological properties of the Zr-Si-N coatings was investigated. The results showed that as the Si content increased from 0 to 5.8 at.%, the coatings transformed from a columnar ZrN to nanocomposite structure with a nano-sized ZrN crystallites embedded in amorphous Si3N4 matrix and further increases of Si content lead to amorphous-like coatings. The maximum hardness (H) of 33 GPa, Young's modulus (E) of 265 GPa, and H/E* value of 0.12 were obtained at Si content of 5.8 at.% in the Zr-Si-N coatings, respectively. The coating with the lowest friction coefficient and the best wear resistance was also obtained at Si content of 5.8 at.%, which was mainly contributed to high value of H/E* and formation of SiO2 or Si(OH)(4) self-lubricating layer due to the interface tribo-chemical reaction. (C) 2014 Elsevier B.V. All rights reserved.

키워드

Zr-Si-N nanocomposite coatingsHybrid coating systemMicrostructureMechanical propertiesTribological propertiesCR-AL-NCATHODIC ARCTHIN-FILMSVACUUM-ARCTIN FILMSNITRIDEPLASMARESISTANCEBEHAVIORSTITANIUM

식별자

WoS UID
000347605200040