본문 바로가기

Improvement of thermal regeneration of spent granular activated carbon using air agent : Application of sintering and deoxygenation

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q3Scopus Q2
저널
KOREAN JOURNAL OF CHEMICAL ENGINEERING31(9) · pp.1641 · 2014
피인용
Web of Science 12KCI 0
JCR IF
JCR 2013 1.241
ISSN
0256-1115

저자

  1. 조준형부산대학교
  2. 오광중교신저자부산대학교
  3. 김윤수코오롱글로벌
  4. 전수빈부산대학교
  5. 서종범HyunDai Steel Complany
  6. 정종현대구한의대학교

초록

Thermal regeneration of spent granular activated carbon (GAC) using sintering, air-activation, and deoxygenation was investigated to determine the potential of this method for overcoming the drawbacks of thermal regeneration. The conditions for each step were optimized. The physicochemical properties of four regenerated GACs were assessed using BET, SEM, and FT-IR analysis. The suitability of the regenerated GACs for liquid-phase applications was assessed by phenol adsorption, using adsorption isotherms, kinetics, and thermodynamics. Sintering increased the micropore area and volume of regenerated GAC by 19% and 16%, respectively, and controlled excessive burn-off, reducing it by 19%. Air-activation has economic advantages because the reaction time is 80% less than that for steamactivation. Deoxygenation improved the maximum adsorption capacity by 7%, although the number of micropores was reduced. Regenerated GAC by sintering, air-activation, and deoxygenation was best for liquid-phase applications; the results show that these steps help to overcome the drawbacks of thermal regeneration.

키워드

Thermal RegenerationSinteringAir-activationDeoxygenationPhenol AdsorptionOVERCOMING CALCIUM CATALYSISWATER-TREATMENTAQUEOUS-SOLUTIONSCOCONUT SHELLP-NITROPHENOLWASTE-WATERADSORPTIONREACTIVATIONPHENOLRESIN

식별자

WoS UID
000341768100018
KCI
ART001901517