본문 바로가기

Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a similar to 300 nm thick conventional single-cell device

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
ENERGY & ENVIRONMENTAL SCIENCE7(9) · pp.3040 · 2014
피인용
Web of Science 617
JCR IF
JCR 2013 15.49
ISSN
1754-5692

저자

  1. Nguyen, TL제1저자부산대학교, 대학원, 인지메카트로닉스공학과, KO
  2. Choi, H.UNIST, Sch Energy & Chem Engn, KO
  3. Ko, S. -J.UNIST, Sch Energy & Chem Engn, KO
  4. Uddin, MA부산대학교, 대학원, 인지메카트로닉스공학과, KO
  5. Walker, B.UNIST, Sch Energy & Chem Engn, KO
  6. 염승집부산대학교, 대학원, 인지메카트로닉스공학과, KO
  7. 정지은부산대학교, 대학원, KO
  8. Yun, M. H.UNIST, Sch Energy & Chem Engn, KO
  9. Shin, T. J.포항가속기연구소, KO
  10. 황승구부산대학교, 나노과학기술대학, 나노메카트로닉스공학과, KO
  11. Kim, J. Y.교신저자UNIST, Sch Energy & Chem Engn, KO
  12. 우한영교신저자부산대학교, 나노과학기술대학, 광메카트로닉스공학과, KO

초록

We report a series of semi-crystalline, low band gap (LBG) polymers and demonstrate the fabrication of highly efficient polymer solar cells (PSCs) in a thick single-cell architecture. The devices achieve a power conversion efficiency (PCE) of over 7% without any post-treatment (annealing, solvent additive, etc.) and outstanding long-term thermal stability for 200 h at 130 degrees C. These excellent characteristics are closely related to the molecular structures where intra-and/or intermolecular noncovalent hydrogen bonds and dipole-dipole interactions assure strong interchain interactions without losing solution processability. The semi-crystalline polymers form a well-distributed nano-fibrillar networked morphology with PC70BM with balanced hole and electron mobilities (a h/e mobility ratio of 1-2) and tight interchain packing (a pi-pi stacking distance of 3.57-3.59 A) in the blend films. Furthermore, the device optimization with a processing additive and methanol treatment improves efficiencies up to 9.39% in a similar to 300 nm thick conventional single-cell device structure. The thick active layer in the PPDT2FBT: PC70BM device attenuates incident light almost completely without damage in the fill factor (0.71-0.73), showing a high short-circuit current density of 15.7-16.3 mA cm(-2). Notably, PPDT2FBT showed negligible changes in the carrier mobility even at similar to 1 mm film thickness.

키워드

LOW-BANDGAP POLYMERPOWER CONVERSION EFFICIENCYORGANIC SOLAR-CELLSCONJUGATED POLYMERSDENSITY FUNCTIONALSTANDEM POLYMERGAP POLYMERSSOLID-STATEPERFORMANCEMORPHOLOGY

식별자

WoS UID
000340450100022