본문 바로가기

Formability evaluation of stainless steel bipolar plate considering draft angle of die and process parameters by rubber forming

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q2Scopus Q1
피인용
Web of Science 31KCI 2
JCR IF
JCR 2013 1.5
ISSN
2234-7593

저자

  1. 정민근제1저자부산대학교, 공과대학, 기계공학부, KO
  2. 진철규부산대학교, 공과대학, 기계공학부, KO
  3. Hwang, Gyu-Wan경남정보대학, Dept Mech Design, KO
  4. 강충길교신저자부산대학교, 공과대학, 기계공학부, 정밀가공시스템전공, KO

초록

In this study, the rubber pad forming process is used to fabricate bipolar plates with stainless steel SUS304 for the proton exchange membrane (PEM) fuel cell. The metallic bipolar plates have received considerable attention because of their low cost, excellent mechanical, electrical, and thermal properties, and simplified fabrication techniques. The thin plate with micro channels was fabricated using a hydraulic press with a capability of 200 ton according to the process parameters of the rubber forming (punch speed, plate pressure, rubber thickness, rubber hardness) considering the draft angle of the die and its formability was evaluated.

키워드

FormabilityBipolar plateDraft angleProcessing parameterFuel cellPEM FUEL-CELLSMICRO-CHANNELSPART IIFABRICATIONPERFORMANCE

식별자

WoS UID
000335564800017
KCI
ART001869308